Freemans Ikon Steel Measuring Tape, Auto-Lock, ABS Case with Belt ClipFrom ₹86 · incl. GSTFit a cupboard lock
A cupboard lock with the concealed hinges and fixings for one cupboard door.
Step by step
- 1
Check the panel thickness
- 2
Mark the lock position
Freemans Ikon Steel Measuring Tape, Auto-Lock, ABS Case with Belt ClipFrom ₹86 · incl. GST - 3
- 4
Test the key and the strike
Safety Check the panel is 20 mm thick for this lock and measure the lock position before drilling; a hole in the wrong place shows on the face of the door.
When to call a professional A carpenter will align the lock and strike first time on a finished cupboard. Door locks for room and main doors are not stocked yet.
Complete packages for this job
A cupboard lock with the concealed hinges and fixings for one cupboard door.
Bronze Economy
- 1 × Europa Cupboard & Drawer LocksLock · Cupboard Lock (20mm Panel) / IV (Ivory)₹261
- 1 × Ebco Slip On Hinge, Regular Close, 1 Set (2 Nos)Hinges (set of 2, full overlay) · 0 Crank (E-HS1)₹69
- 1 × Zipco Wooden/Gypsum (POP) Screws, 1 BoxFixings · Standard pack₹353
Complete package · incl. GST₹683
Silver Premium
- 1 × Europa Cupboard & Drawer LocksLock · Cupboard Lock (20mm Panel) / SS (Stainless Steel)₹288
- 1 × Ebco Slip On Hinge, Regular Close, 1 Set (2 Nos)Hinges (set of 2, full overlay) · 0 Crank (E-HS1)₹69
- 1 × Zipco Wooden/Gypsum (POP) Screws, 1 BoxFixings · Standard pack₹353
Complete package · incl. GST₹710
Gold Luxury
- 1 × Europa Cupboard & Drawer LocksLock · Cupboard Lock (20mm Panel) / SS (Stainless Steel)₹288
- 1 × Ebco Slip On Hinge, Regular Close, 1 Set (2 Nos)Hinges (set of 2, full overlay) · 0 Crank (E-HS1)₹69
- 1 × Zipco Wooden/Gypsum (POP) Screws, 1 BoxFixings · Standard pack₹353
Complete package · incl. GST₹710
Next steps
Hang a heavy shelf
The wall decides the fixing. Check the wall type, mark level holes, drill and anchor, then fasten and load-test.
Read guide 4 min guideSecure two room doors
Tower bolts, 5" butt hinges and door catchers to bring two room doors up to the same standard. Door locks are not stocked yet.
Read guide 4 min guideSeal a wet-area gap
Remove the old sealant, clean and dry the joint, apply a steady bead, then tool it smooth and let it cure.
Read guide
