Delhi/NCR only
Seal a wet-area gap
Remove the old sealant, clean and dry the joint, apply a steady bead, then tool it smooth and let it cure.
Step by step
- 1
Remove old sealant
- 2
Clean and dry
- 3
Apply a steady bead
- 4
Tool and cure
Silicone sanitary sealant is not stocked yet — ask in your quote.
Safety Check the wall or panel material and the load rating before drilling or fastening.
MORE HARDWARE GUIDES
Next steps
5 min guide
Hang a heavy shelf
The wall decides the fixing. Check the wall type, mark level holes, drill and anchor, then fasten and load-test.
Read guide 5 min guideFit a cupboard lock
A cupboard lock with the concealed hinges and fixings for one cupboard door.
Read guide 4 min guideSecure two room doors
Tower bolts, 5" butt hinges and door catchers to bring two room doors up to the same standard. Door locks are not stocked yet.
Read guide