Branded products, compatibility-checked Delivery across Delhi NCR GST quotations
Delhi/NCR only
3 MIN GUIDE · DIY TOOLS

Spray paint a surface properly

Clean, sand and degrease the surface, then Mask everything you are not painting. A short checklist before you press the cap.

Step by step

  1. 1

    Clean, sand and degrease the surface

  2. 2

    Mask everything you are not painting

  3. 3

    Shake for the full time on the label

  4. 4

    Build thin coats from 25-30 cm, not one wet one

Safety Aerosols are flammable and under pressure: use them in a ventilated space away from any flame or spark, and never puncture or heat the can.

MORE DIY TOOLS GUIDES

Next steps

4 min guide

Build a home toolkit

The tools that cover most household repairs, bought once rather than one emergency at a time.

Read guide 3 min guide

Free a seized bolt without breaking it

Clear loose rust and dirt from the thread, then Apply a penetrant and wait, do not force it. A short checklist before you press the cap.

Read guide 3 min guide

Use an aerosol safely indoors

Check the label allows indoor use at all, then Open a window and cross-ventilate the room. A short checklist before you press the cap.

Read guide
Ask on WhatsApp